|
|
|
Who's Online
There currently are 5687 guests and
4 members online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
 ;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
Section
TV tuner (SRC mode)
04
4 To perform manual tuning, briefly touch c or d. The channels move up or down step by step.
# You can also perform manual tuning by pressing c or d button.
Notes
English
! Up to 24 stations, 12 for each of two TV bands, can be stored in memory. ! You can also use a and b to recall stations assigned to preset tuning keys P1P12.
5 To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the channels until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by briefly touching either c or d. # If you keep touching c or d you can skip broadcasting channels. Seek tuning starts as soon as you release the keys. # You can also perform seek tuning by pressing and holding c or d button.
Storing and recalling broadcast stations
If you touch any of the preset tuning keys P1P12 you can easily store up to 12 broadcast stations for later recall with the touch of a key. % When you find a station that you want to store in memory, keep touching one of preset tuning keys P1P12 until the preset number stops flashing. The number you have touched will flash in the preset number indicator and then remain lit. The selected station has been stored in memory. The next time you touch the same preset tuning key the station is recalled from memory.
# To switch between P1P6 and P7P12, touch or . # When the touch panel keys are not displayed, you can display them by touching the screen. # When P1P6 and P7P12 are not displayed, you can display them by touching LIST.
En
13
|
|
|
> |
|
