|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
GF-330
3-2 TURNTABLE SECTION
1. Set the function switch to the PHONO position. 2. Connect the oscilloscope to the speaker terminal. 3. Use a HP-4005 record for all adjustment.
PHONO SPEED PCB
VR601
VR602
VR603
3-3 CASSETTE DECK SECTION
3-3-1 Tape speed adjustment
1. Set the function switch to the TAPE position. 2. Connect the frequency counter to the speaker terminal. 3. Load tape deck with MTT-111N (use the midpoint of side A). 4. Press the PLAY button on tape and adjust MOTOR VR to obtain 3,000Hz +/- 30Hz. 5. Stop tape .
3-3-2 Azimuth adjustment
1. Connect the oscilloscope to the speaker terminal. 2. Load a MTT-114N test tape and press the PLAY button. 3. Adjust the azimuth using a screwdriver to maintain the max. L & R out voltage. 4. Secure the azimuth position using locking paint.
6
|
|
|
> |
|
