|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am only search for 5 Minute, by it in 5 Minutes to and get ist in few ours! Best i found in the Internet and my Amplifer is repaired as well! Thank you
 ;
Readable text and good copy. Very much needed if you wish to do some repairs on this fine old unit.
;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
5 Troubleshooting
Notes: 1. Before troubleshooting, setup the PC�s display as below. � Resolution: 1280 x 1024 � H-frequency: 64 kHz � V-frequency: 60 Hz 2. If no picture appears, make sure the power cord is correctly connected. 3. If you push and hold the EXIT button for more than 5 seconds, the monitor automatically turns back to the factory preset.
5-1-1 No Power
When Pin 6 of CN105 is 0V does proper DC 12V, 5V appear at Pin 1, 2 and 7 of CN105 seperately? Yes Does proper DC 5 V appear at Pin 3 of IC115? Yes Does proper DC 3.3 V appear at Pin 3 of IC112? Yes Does proper DC 2.5 V appear at Pin 2 of IC116 and IC117? No Check IC116, IC117 and related circuit. No No
�
No
Change power Adaptor.
Check IC115 and related circuit.
Check IC112 and related circuit.
� 0V means power on state.
GH17LS/GH17ES
5-1
|
|
|
> |
|
