Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
Text excerpt from page 30 (click to view)
Information and Communication Products
6.7.11 RLR (earphone-path faulty) Fault code: D 20 Affected unit: Components: Earphone Needed equipment: Multimeter Working material: none Diagnosis: The diaphragm of the earphone could be affected by deposits with increasing age. There will be a higher attenuation when measuring RLR (receiving loudness rating). In most cases the earphone is defective. If there is no noise audible on the earphone when making a sidetone check it�s also possible that the wire of the coil is cut off. Check the resistance of the coil with a multimeter. It must be about 150 ohms. If you measure a nearly infinitely high resistance, the wire may be cut off. Repair by component exchange: Use new earphone capsule. Test: Put the repaired board in a testhousing. Make a sidetone check by blowing into the microphone and checking the volume of the noise on the earphone. If there is a telephone tester with acoustic testhead make a RLR-test and check whether the attenuation is o.k.. Gigaset 3000 Classic/ Comfort