|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual I purchased was exactly what I needed to repair my Toshica television. The manual contained schematics and troubleshooting information that was very helpful.
;
Il download del Service Manual JVC HR 4100 non é stato eseguito
 ;
The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
;
Very fast, clear and usefull site !
Also this Service Manual are very well maked and with a very good definition !
Very fast download speed !
Recomended Seller !
;
The manual you sent me was excellent. It included clear, readable diagrams and a usable parts list. I would surely use your service again. Thanks
GM-X554
Connection Diagram
Fuse (30 A) Special red battery wire [RD-223] (sold separately) After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery. Fuse (30 A) Ground wire (Black) [RD-223] (sold separately) Connect to metal body or chassis.
Grommet
RCA input Connecting wires with RCA pin plugs (sold separately).
Amplifier with RCA input jacks
External Output If only one input plug is used, do not connect anything to RCA input jack B.
Car stereo with RCA output jacks
Front side
Input Select Switch For two-channel input, slide this switch to the left. For four-channel input, slide this switch to the right.
RCA output jack
RCA input jack B RCA input jack A
Connecting wires with RCA pin plugs (sold separately). Back side Fuse (20 A) � 2
Speaker terminal
System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch.
23
|
|
|
> |
|
