Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Text excerpt from page 17 (click to view)
5
6
7
8
6. ADJUSTMENT
There is no information to be shown in this chapter.
A
7. GENERAL INFORMATION
7.1 DIAGNOSIS 7.1.1 DISASSEMBLY
- Removing the Case (not shown)
B
1. Remove the eight screws and then remove the Case.
- Removing the Amp Unit (Fig.1)
Panel
1 1 1 1
C
1 2 3 4
Remove the eight screws.
Remove the screw and then remove the two Panels. Remove the eight screws and then remove the two Heat Sinks. Remove the five screws and then remove the Amp Unit.