|
There are currently no product reviews.
 ;
Very good quality, prompt response. This website has reasonable prices and wide range of manuals that are hard to find.
;
The document was usefull, and it was exactly what I was looking for.
;
OK?..manual is complet and helpfull... for repairing such a old and rare boombox like JVC PCM it is necessary...
;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
Setting the Unit
8.1 OPERATIONS
Gain Control Power Indicator
If sound level is too low, even The power indicator lights when the volume of the car stereo used along power is switched on. with this power amplifier is turned up, turn gain control on front of the power amplifier clockwise. If the sound distorts when the volume is turned up, turn the gain control counter-clockwise. GM-X962/XR/ES
� When using with an RCA equipped car
stereo (standard output of 500 mV), set to the NORMAL position. When using with BFC (Beat Frequency Control) Switch an RCA equipped Pioneer car stereo with
8. OPERATIONS AND SPECIFICATIONS
match the car stereo output level. AM broadcast with your car stereo,
If you hear a beat while listening to an max. output of 4 V or more, adjust level to change the BFC switch using a small standard tip screwdriver.
LPF (Low-Pass Filter) Select Switch
Set LPF select switch as follows according type of speaker that is connected to the speaker output connector and the car stereo system: LPF Select Audio frequency range Speaker Remarks Switch to be output Type
LPF (left) Very Low Frequency range Subwoofer Connect a subwoofer. OFF (right) Full range
GM-X962,X862
19
|
