|
There are currently no product reviews.
 ;
very good manual with clear electrical schemes. Very helpful to find wat was wrong inside my microwave.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
GM-X944
Connection Diagram
Fuse (30 A) � 2 Grommet Special red battery wire [RD-223] (sold separately). After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.
Fuse (30 A) � 2
Ground wire (black) [RD-223] (sold separately). Connect to metal body or chassis.
RCA input Connecting wires with RCA pin plugs (sold separately).
Amplifier with RCA input jacks
Car stereo with RCA output jacks External Output For details on how to connect to RCA input jacks A and B, see the �Connecting the Speakers and Input wires� section.
Front side
RCA output jack
RCA input jack B RCA input jack A
Back side Fuse (30 A) � 3
Connecting wires with RCA pin plugs (sold separately).
Speaker output terminal
System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch.
28
|
