|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very fast service, best quality of the service manual and the schematics
 ;
This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
;
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
;
This schema available for me in good condition. I would highly recommend.
;
Thanks for this "hard to find" service manual.
I apreciate the good quality of scanning and the pages scanned in A3 format.
GM-X944
Connection Diagram
Fuse (30 A) � 2 Grommet Special red battery wire [RD-223] (sold separately). After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.
Fuse (30 A) � 2
Ground wire (black) [RD-223] (sold separately). Connect to metal body or chassis.
RCA input Connecting wires with RCA pin plugs (sold separately).
Amplifier with RCA input jacks
Car stereo with RCA output jacks External Output For details on how to connect to RCA input jacks A and B, see the �Connecting the Speakers and Input wires� section.
Front side
RCA output jack
RCA input jack B RCA input jack A
Back side Fuse (30 A) � 3
Connecting wires with RCA pin plugs (sold separately).
Speaker output terminal
System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch.
28
|
|
|
> |
|
