|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
 ;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
PREPARATIONS
Caution: Keep the DC Power switch of the camera in the OFF position through the installation.
GP-KS822H with GP-AD22TA and optional Cmount lens
1. Remove the front cap of the camera head and confirm that the surface of the optical filter of the camera head is clean.
GP-KS822H with GP-LM3TA, GP-LM7TA, GPLM15TA or GP-LP12TA
1. Remove the front cap of the camera and confirm that the surface of the optical filter of the camera head is clean.
Front Cap
Front Cap
If the surface of the optical filter is dirty or dusts are on it, clean it up with a blower brush which is for film camera lenses (may be available at your local camera store) or supplied lens cleaning paper. 2. Attach the optional C-mount lens to the C-mount Adaptor GP-AD22TA by rotating it clockwise.
If the surface of the optical filter is dirty or dusts are on it, clean it up with a blower brush which is for film camera lenses (may be available at your local camera store) or supplied lens cleaning tissue paper. 2. Rotate the focus lock ring fully clockwise. Mount the Pinhole Lens, Wide-angle Lens or Super Wideangle Lens to the camera by rotating it clockwise slowly.
3. Rotate the focus lock ring fully Mount the lens and C-mount adaptor by rotating them clockwise slowly.
Focus Lock Ring
Focus Lock Ring
Caution: If the optional C-mount lens size exceeds 50.8 mm {2�} in diameter, 70 mm {2-3/4�} in length and 300 g {0.66 lbs} in weight, both the camera and lens should be secured.
-10-
|
|
|
> |
|
