|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
8. White balance setting [WHITE BAL]
The white balance adjustment is selectable from the following. AWC (default): The automatic white balance control mode is activated. This adjustment is suitable for a location where a light source is stable. When "AWC" is selected, the operation to adjust the white balance is required. ATW: Activates the automatic white balance tracking mode. The camera continuously measures the white balance and automatically performs adjustment. If the situation meets one of the following or other, color may not be accurately reproduced. In such a case, select "AWC" to adjust the white balance. � The photographic subject is mostly highly-colored. � The photographic atmosphere is under the bright blue sky or at nightfall. � The illumination of the light illuminating the photographic subject is low. MANU: The white balance is manually adjusted. When "AWC" is selected, follow the steps below to adjust the white balance.
9. Black balance setting [BLACK BAL]
The black balance adjustment is generally unnecessary, but the adjustment is available also by hand. Top screen of SETUP menu
** SET UP ** P2
SCENE FILE *FILE1 WHITE BAL AWC BLACK BAL *MANU SYNC INT ELECTRIC ZOOM ON FREEZE ON END
"BLACK BAL" screen
** BLACK BAL ** R-PED B-PED �....|....+ �....|....+
RET END
z Point the camera at a white photographic subject. x Hold
down the [BAR (AWC)] button for more than 2 seconds on the front face of the CCU. � AWC starts up and the LED located above the [BAR (AWC)] button blinks. When �AWC OK� appears and the LED goes out, the adjustment is completed.
z Move
the cursor to "BLACK BAL" and press the [SEL] button. � The "BLACK BAL" screen appears.
x Mount the lens cap on the camera lens. c Move
the cursor to "R-PED", be sure to view a vector scope or a waveform monitor when "R-PED" is adjusted with use of the [e] or [f] button. Adjustment shall be performed so that the carrier is minimized.
Note: � �AWC NG� appears. Perform the steps 1 and 2 again if �AWC NG� appears and the LED stays on. When "MANU" is selected, follow the steps below to adjust the white balance.
v Move the cursor to "B-PED" and adjust "B-PED" with use
of the [e] or [f] button while viewing a vector scope or a waveform monitor. Adjustment shall be performed so that the carrier is minimized.
z Select "MANU" and press the [SEL] button.
� The "WHITE BAL" screen appears.
x Move the cursor to "R-GAIN" or "B-GAIN" and adjust the
white balance with use of the [e] or [f] button. "WHITE BAL" screen
** WHITE BAL ** R-GAIN B-GAIN �....|....+ �....|....+
RET END
23
|
|
|
> |
|
