|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
 ;
Immediate response with excellent service - highly reccommended
 ;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
50
EN
USER MAINTENANCE
After Use
LENS COVER Open/Close Ring
1 2 3 4 5 6 1
Remove. PUSH Button EJECT Switch
Turn off the camcorder. Open the LCD monitor* fully. Slide EJECT to open the cassette holder, then remove the cassette. Press PUSH to close and lock the cassette holder. Close and lock the LCD monitor*. Slide BATTERY RELEASE to remove the battery pack. Turn the LENS COVER Open/Close Ring to close the lens cover.
BATTERY RELEASE Set to �OFF�.
Cleaning The Camcorder
To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. Open the LCD monitor* and wipe gently with a soft cloth. Be careful not to damage the monitor*. Close the LCD monitor*. To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. To detach the eyepiece, turn it counterclockwise and pull it out. Remove dust from the viewfinder using a blower brush. Re-attach the eyepiece and turn it clockwise.
2 3 4 5 6
Remove. PUSH Button EJECT Switch
*GR-SXM320 only. NOTES: � Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mold may form if the lens is left dirty. � When using a cleaner or chemically treated cloth refer to the cautions of each product. � When removing the eyepiece, be sure to hold the viewfinder securely.
|
|
 |
> |
|