|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
46
EN
LENS COVER Open/Close Ring
USER MAINTENANCE
After Use
1 2 3 4 5 6
Set the Power Switch to �POWER OFF� to turn off the camcorder. Open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then remove the cassette. Close and lock the cassette holder by pressing PUSH. Close and lock the LCD monitor. Slide BATTERY RELEASE to remove the battery pack. Turn the LENS COVER Open/Close Ring to close the lens cover.
BATTERY RELEASE Set to �POWER OFF�.
Cleaning The Camcorder
1 CLEAN EXTERIOR
Remove. PUSH EJECT
Wipe gently with a soft cloth. �Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.
2 CLEAN LCD MONITOR 3 CLEAN LENS
Open the LCD monitor and wipe it gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. Blow it with a blower brush, then wipe it gently with lens cleaning paper. Turn the eyepiece counterclockwise and pull it out. Remove dust using a blower brush. Re-attach the eyepiece and turn it clockwise.
4 REMOVE EYEPIECE 5 CLEAN VIEWFINDER 6 RE-ATTACH EYEPIECE
NOTES:
� Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mold may form if the lens is left dirty. � When using a cleaner or chemically treated cloth, refer to the cautions that came with it. � When removing the eyepiece, be sure to hold the viewfinder securely.
|
|
|
> |
|
