|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Great quality copy, right what I was looking for, all I need to fix my radio.
Thanks
 ;
I BOUGHT A PAIR OF INFINITY VINTAGE SPEAKERS THAT REQUIRED TO BE REPAIRED AND THE ELECTRONIC TECHNICIAN ASKED ME FOR THE SERVICE MANUAL.
I TRIED TO GET IT AT THE MANUFACTURER'S SITE WITH NO SUCCESS, SO I STARTED TO LOOK FOR IT IN THE WEB FOR A LONG TIME, UNTIL I FOUND THE SERVICE MANUAL IN THIS EXCELLENT SITE "OWNER'S MANUAL.COM".
NOW I HAVE MY SPEAKERS WORKING AND ENJOYING THE MUSIC I LIKE.
THANKS TO "OWNER`S MANUAL.COM" I RECOMMEND THIS SITE TO EVERYONE.
 ;
Very quick response. Very good and accurate print quality of the scanned document.
 ;
The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
 ;
Excellent manual. Helped me out with disassembling and troubleshooting my projector.
1.7 MANUAL EJECTION OF THE CASSETTE TAPE Note: The following procedure describes a simplified method of ejecting the cassette tape in case it is not possible to eject it, due to an electrical failure. Be careful not to damage any of the parts or the tape 4. In order to change the mechanism mode at the unloading end apply 3 V, DC to the electrode on the top surface of the Loading Motor Assembly and then set it to the eject mode. 5. If there is any slack tape in the tape transport system, wind it inside the cassette tape by turning the Supply Reel Disk from the backside of the Slide Deck Assembly. 6. Peel off the PVC tape and take out the cassette tape from the cassette housing. Note: Make sure that grease or a similar substance is not attached to the surface of the tape. Similarly, also make sure that grease or a similar substance is not attached on the Mechanism Assembly.
when performing repairs or maintenance work.
1. Remove the Power Unit (battery, DC code, etc.) from the main unit. 2. Open the cassette cover. 3. Attach a piece of PVC tape at the front of the cassette housing. Note: This helps prevent the tape from being damaged when the Cassette Housing Assembly is moved upward at the unloading end.
(DC3V)
REEL DISK ASSY (SUP) PVC TAPE
Fig. 1-7-1
1-10
|
|
 |
> |
|
|
Parse Time: 0.243 - Number of Queries: 111 - Query Time: 0.044