|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
20
EN
RECORDING (Cont.)
Basic Recording
You should already have performed the necessary preparations ( pgs. 8 � 19). Set the Select Dial to �AUTO� and try recording that way before attempting to use more advanced features.
P
LA
Y OFF R EC
5S
VIEWFINDER
REC
STANDBY
RECORDING START/STOP BUTTON POWER LAMP
OFF
DURING RECORDING
VIEWFINDER
PAUSE
PL
AY
REC
5S
AUTO
FOCUS EXP.
SET
WB PRO
RECORD/STANDBY
NOTE:
Before starting recording, make sure you set the date and time ( pg. 11). Even if they don�t appear during recording, they are recorded onto the tape and can be displayed during playback ( pg. 45).
1 PULL OUT VIEWFINDER 2 TURN ON POWER
Align its mark with �STANDBY�. Set the Power Dial to �REC�. The power lamp comes on and RECORD/STANDBY mode is engaged. �If you don�t pull out the viewfinder, the power cannot be turned on.
5 END RECORDING
When you�re finished recording, press RECORDING START/STOP. Align the viewfinder�s mark with �CAMERA OFF�; the power lamp goes out and the lens cover closes automatically.
� When transporting, make sure the viewfinder is in this position. � Before turning the power on again, you must pull out the viewfinder.
3 SELECT OPERATION MODE
�In the �AUTO� mode, only Zoom (20x), Snapshot, 5S (if you change the setting in the System Menu, either 5SD or ANIMATION becomes available � see pgs. 18 � 19) and Self-Timer are available.
Set the Select Dial to �AUTO�.
NOTES:
4 START RECORDING
When �PAUSE� appears in the viewfinder, press RECORDING START/STOP. A beep signals the start of recording.
� If 5 minutes elapse in the RECORD/STANDBY mode, the power shuts off automatically to conserve energy. To turn the camcorder on again, set the Power Dial to �OFF�, then to �REC�. As long as you don�t take out the tape you were using or play it back, you can continue recording from where you left off with no noticeable break. � RECORD/STANDBY means that a tape is loaded and the camcorder is ready to record. � If RECORD/STANDBY (Pause) is engaged for 5 minutes, the Stop mode is automatically activated to protect the heads. � If you start a recording on a blank portion of the tape, or onto a brand new tape, recording starts approximately 3-4 seconds after you press RECORDING START/STOP. In order to record the entire scene or sequence, make sure to start recording slightly in advance.
|
|
|
> |
|
