EN31
MENU/BRIGHT Wheel
Protecting Images
The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality indication, that image cannot be deleted.
1
Power Switch Lock Button
Set the VIDEO/DSC Switch to � �, then set the Power Switch to � � while pressing down the Lock Button. �A stored image is displayed. Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select � MEMORY� and press it. The MEMORY Menu appears. Rotate the MENU/BRIGHT wheel to select �PROTECT� and press it. The PROTECT Index Screen appears.
2 3
TO PROTECT AN IMAGE
VIDEO/DSC Switch (Open the LCD monitor to access this switch)
Before doing the following, perform steps 1 through 3 above.
4 5
Display
I NDEX PROTECT DELET E DPOF FORMAT
Menu Screen
Rotate the MENU/BRIGHT wheel to move the green frame to the desired image and press it. A � � padlock mark appears on the selected image. Repeat this procedure for all images you do not wish to delete by accident. Rotate the MENU/BRIGHT wheel upward to select �EXIT� and press it. The normal playback screen appears.
RETURN
EXIT
1F
<PROTECT>
2S 3S
PROTECT Index Screen
NOTE: When the memory is initialised or corrupted, even protected images are deleted. If you do not want to lose important images, transfer them to a PC and save them.
4F
5F
6F
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3 above.
Normal playback
EXIT
1F
If Protection is removed
Padlock mark
4 5
<PROTECT>
2S 3S
Rotate the MENU/BRIGHT wheel to move the green frame to the desired image and press it. The � � padlock mark located above the image disappears and the image is no longer protected. Repeat this procedure for all images from which you wish to remove protection. Rotate the MENU/BRIGHT wheel upward to select �EXIT� and press it. The normal playback screen appears.
4F
5F
6F
Normal playback
