|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
18
EN
SNAPSHOT Button (GR-SXM747UM/SXM347UM only)
RECORDING Advanced Features
Snapshot (GR-SXM747UM/SXM347UM only)
Use your camcorder like a regular camera and take a snapshot, or several of them in succession.
1 2
Power Switch
Set the Power Switch to �
� or �
�.
NOTES: � After SNAPSHOT is pressed, there is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, which is recorded together with the image. � Snapshot is available during playback as well. However, the shutter sound is not heard.
NIGHT-ALIVE Button (GR-SXM747UM/SXM347UM only)
Press SNAPSHOT. If you press during Record-Standby . . . .... a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording . . . .... a still image will be recorded for approx. 6 seconds, then the normal recording resumes.
Night-Alive (GR-SXM747UM/SXM347UM only)
Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.
1 2 3
Power Switch
Set the Power Switch to �
� or �
�.
Press NIGHT-ALIVE repeatedly until the desired mode�s name and indication appear. They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The mode is activated. To cancel the effect, press NIGHT-ALIVE repeatedly until �OFF� appears. �OFF� is displayed for approx. 2 seconds.
NOTES: � During Night-Alive, the following functions or settings cannot be activated: ��Picture Stabilizer� ( pg. 16), �Program AE With Special Effects� ( pg. 20) and �Digital Effects� ( pg. 21). ��S.LX� in CAMERA MENU ( pg. 23). � Night-Alive does not work when LIGHT OFF/AUTO/ON is set to �AUTO� or �ON� ( pg. 17). � During Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended.
A 1 2
NIGHT AUTO
The shutter speed is automatically adjusted (maximum 1/6 sec.).
NIGHT 10X*
The shutter speed is set to 1/6th of a second to provide 10 times the sensitivity.
NIGHT 60X*
The shutter speed is set to 1 second to provide 60 times the sensitivity. *Appears when the Power Switch is set to � �.
|
|
|
> |
|
