|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
CARE AND MAINTENANCE
Before cleaning or carrying out maintenance, switch off the appliance and turn off the water tap. Cleaning the outside of the appliance: To clean the outside of the appliance, use a neutral detergent and a damp cloth. Do not use abrasive detergents. Cleaning the inside of the dishwasher: Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. Upper spray arm: 1. Slacken the fixing nut (A) (by turning it counter-clockwise) and detach the spray arm (B) by pulling it down. 2. Rinse the nozzles. 3. Remount the spray arm by aligning it with the rotary mounting and insert it. 4. Tighten the fixing nut by turning it clockwise. Make sure the nut is fully tightened (it should click).
Make sure the spray arm rotates freely.
Lower spray arm: 1. Press the two levers which fix the spray arm inwards (C), and detach by pulling it up (D). 2. Rinse the nozzles. 3. Remount the spray arm by aligning it with the rotor pin and insert it. 4. Push the spray arm down firmly until it is fixed in place. 5. Make sure the two levers are correctly inserted (they should click).
Make sure the spray arm rotates freely.
Cleaning the filters: 1. Fully unscrew the wide-mesh central filter by turning it counter-clockwise and extract it (E). 2. Fully unscrew the fine-mesh filter and extract it from the wide-mesh central filter (F) (pay due attention to the holes in the bottom of the filter). 3. Remove the large filter (G). 4. Clean all filters regularly under running water, and check that no impurities are left inside the dishwasher.
5. Reassemble: Insert the fine-mesh filter in the wide-mesh central filter. (pay due attention to the holes in the bottom of the filter). Insert the filter unit and fix it by turning it clockwise. Make sure that the filters have been inserted correctly. The filter unit must be correctly assembled to ensure good wash results.
15
|
|
|
> |
|
