|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
GS-XP07ER�GU-XR07ER GS-XP09ER�GU-XR09ER GS-XP12ER�GU-XR12ER
How to disassemble the Fan motor.
1. Remove 3 Fan housings (Remove the nails of both sides).
NAIL
4. Tilt the Fan motor ass'y around the Bearing, remove it. CAUTION: DO NOT HIT FANS AGAINST FAN HOUSING.
1
2
5. Remove 2 screws fixing the Fan and Joint with hexagon socket screw key (Diagonally 3mm).
Fan housing
2. Remove the Fan motor lead wires from the Wire clamps.
CAUTION: WHEN YOU ASSEMBLE THE FAN MOTOR ASS'Y TO UNIT, YOU DO NOT MAKE THE FANS TOUCH THE FAN HOUSINGS. AFTER ASSEMBLY OF THE FAN MOTOR ASS'Y MAKE SURE THAT THE FAN HAS NOT TOUCHED THE FAN HOUSING.
How to disassemble the Louver motor.
3. Support the Fan motor with your hand, and remove 2 screws fixing Fan motor clamps. Remove 2 Fan motor clamps. 1. Disconnect the connector (CN205). Remove 2 screws fixing the Louver motor.
35
|
|
|
> |
|
|
Parse Time: 0.219 - Number of Queries: 108 - Query Time: 0.05
