|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
 ;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
 ;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
 ;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Condenser Coil
Clean condenser coil every three months. Dust and lint will cause the following: � reduced cooling performance � increased energy usage � premature failure of electrical parts 1. 2. 8. Grasp ends of toe grille and lift up. Pull forward to remove. Clean coil with a vacuum cleaner hose nozzle. Replace toe grille by positioning top and snapping in bottom. Toe grille can only be installed one way. Rotate stabilizing leg counterclockwise until leg is off floor. Pull refrigerator away from wall and run a vacuum brush across condenser fan outlet grille on lower back of refrigerator.
4.
Light Bulb
WARNING
To avoid electrical shock which can cause severe personal injury or death, unplug power cord or open household circuit breaker to refrigerator before replacing light bulb. After replacing light bulb, reconnect power. Replace bulb with a 40 watt or lower appliance bulb. Examples are as follows: Amana #A0282803 GE or Westinghouse #40A15/1 Sylvania #40A15 Important If hot, allow bulb to cool and wear gloves to protect hands should bulb break. 1. Remove light bulb cover by unscrewing fastener at back center of light cover. Pull light cover straight down. There are small supports on each side to hold cover in place. Replace light bulb. Reinstall light bulb cover by reversing above procedure.
2.
8
|
|
 |
> |
|