|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
;
Very good scanning quality. All schematics are very legible. Worth every cent !
GS-XP07ER�GU-XR07ER GS-XP09ER�GU-XR09ER GS-XP12ER�GU-XR12ER
How to disassemble the Fan motor.
1. Remove 3 Fan housings (Remove the nails of both sides).
NAIL
4. Tilt the Fan motor ass'y around the Bearing, remove it. CAUTION: DO NOT HIT FANS AGAINST FAN HOUSING.
1
2
5. Remove 2 screws fixing the Fan and Joint with hexagon socket screw key (Diagonally 3mm).
Fan housing
2. Remove the Fan motor lead wires from the Wire clamps.
CAUTION: WHEN YOU ASSEMBLE THE FAN MOTOR ASS'Y TO UNIT, YOU DO NOT MAKE THE FANS TOUCH THE FAN HOUSINGS. AFTER ASSEMBLY OF THE FAN MOTOR ASS'Y MAKE SURE THAT THE FAN HAS NOT TOUCHED THE FAN HOUSING.
How to disassemble the Louver motor.
3. Support the Fan motor with your hand, and remove 2 screws fixing Fan motor clamps. Remove 2 Fan motor clamps. 1. Disconnect the connector (CN205). Remove 2 screws fixing the Louver motor.
35
|
|
|
> |
|
