|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
2. Remove the T-40 Torx head bolt securing the drive shaft bearing to the thrust plate. 3. Remove the four (4) T-40 Torx head bolts securing the thrust plate to the posts on the motor mounting plate. NOTE: The two (2) screws at the top of the bracket have ball ends. (Fig. 3-31) Figure 3-32 shows all the components of the thrust plate assembly.
Bolt with Ball End
Bolt without Ball End
Fig. 3-31
Fig. 3-32
With the thrust plate removed, the drive belt, pulley and brake assembly can be removed.
Removing the Brake Assembly/Nutate Shaft
1. Remove the spin basket. 2. Remove the drive belt from the large pulley. 3. Pull the large pulley from the nutate shaft. 4. Rotate the cam driver counter-clockwise while pulling the brake assembly out. (Fig. 3-33) 5. The brake assembly/spin tube and nutate shaft can now be removed.
Cam Driver
Fig. 3-33 6. Pull the nutate shaft out of the brake assembly/spin tube.
41
|
|
|
> |
|
