|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I do not have very much to say.
The price is quite covenient, delivery was better as promised (about 12 ours, against the specified 24 hours if I remember well), and the quality of the PDF is more than acceptable.
The Service Manual of Sansui R30 itself is also satisfactory: good graphic for schematics and layouts, simple and well structured.
Giovanni Bianchi
;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
;
Hard to find manual was ready the next day. Scans were very legible (including schematics). All the essential parts of the service manual were present (adjustment procedure, schematics, and parts list). It would have been nice if the rest of the manual was included (disassembly procedure, theory of operation, etc.).
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
GX15
3. No voice is heard from the earpiece.
Phone (Handset) Do keypad tones and melodies sound?
YES
CONFIDENTIAL
NO
Go to the section �Earpiece (for loud speaker) does not work�. (see page 2-50)
Is 0.5 V or more applied to R101 (IC103 pin 9 side)?
NO
YES
IC103 is defective.
Is 0.5 V or more applied to JK101 pin 5?
NO
YES
Parts between socket JK101 pin 5 and IC103 pin 9 are defective.
Is 0.5 V or more applied to JK101 pin 3?
NO
YES
Socket JK101 is defective.
Is 0.5 V or more applied to TP120?
NO
YES
Parts between socket JK101 pin 3 and TP120 are defective.
Is 2.4 - 2.6 V applied to TP176?
NO
YES
R122 is defective.
Is 2.4 - 2.6 V applied to R115 (IC103 pin 76 side)?
NO
YES
R115 is defective. (Hands free kit mode is set.)
IC103 is defective. Hands free kit (Headset) Replace the hands free kit. Is sound produced?
NO
YES
The hands free kit is defective.
Is signal sent to JK101 pin 4?
NO
YES
Socket JK101 is defective, or the hands free kit is in a poor contact with the socket plug.
Is signal sent to TP121?
NO
YES
Parts between socket JK101 pin 4 and TP121 are defective.
Is signal sent to R124 (IC103 pin 60 side)?
NO
YES
Parts between IC103 pin 60 and TP120 are defective.
Disconnect the hands free kit. Is voice heard in phone mode?
YES
NO
IC103 or IC106 is defective.
Is the voltage 0 V on R101 (IC103 pin 9 side)?
NO
YES
IC103 is defective.
Socket JK101 is defective.
2 � 48
 $4.99 GX15 SHARP
Circuit Diagrams Set of circuit diagrams. The diagrams will be provided as PDF file. The file will be delivered after…  $4.99 GX15 SHARP
User Guide It's a complete guide ( also known as operating manual or owner's manual), and it's in PDF format. A…
|
|
|
> |
|
