|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I'm very satisfied with your manual service. Your website made it easy to locate the correct manual. Also the quality is great and I never had a problem reading the fine details.
Thanks again.
Jeff Miller
JM Electronics
 ;
Good quality service manual German user manual. German user manual This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand
;
The manual for Sony LBT-D505 component stereo system is was excellent , with schematics, parts layout and parts list as well as instructions for adjustments for each component. Print was clear even when enlarged.
;
It's exactly a complete and very useful manual with all details what I needed. Thank you!I will come back whenever I need your manuals or schematics.
;
I searched EVERYWHERE looking for the manual/s on this "extinct" amp. Owner-Manuals.com made it available and for nearly nothing. Thanx to them, I can decipher the unknown cables and sort them out. Thanx, Owner-Manuals.com!!
1-9. Replacement of the Boards
1-9-2. DPR-160 and FM-75 Boards Replacement
1. Turn the power OFF and remove the power cord. 2. Remove the front panel. (Refer to Section 1-1.) 3. Remove the three screws to remove the FCC panel assembly. 4. Raise the eject levers disposed at both edges on the board to be removed in the arrow direction. 5. Hold the eject levers and slowly pull the board off forwardly.
1-9-3. IF-780 and SCS-28, FC-82 Boards Replacement
1. Turn the power OFF and remove the power cord. 2. Remove the sub panel (SCSI, FC). (Refer to Section 11.) 3. Remove the two screws to remove the IF-780 board or SCS-28 board, FC-82 board.
IF-780 board
DPR-160 board
B3 x 5
B3 x 5 B3 x 5 FCC panel assembly B3 x 5
SCS-28 board or FC-82 board B3 x 5
FM-75 board
B3 x 5
B3 x 5
Eject lever
Eject lever
For installation, perform in the reverse order of the removal procedures. n After inserting the board, press in the both edges of the board panel simultaneously and connect firmly the board to the connector of the motherboard (MB-887 board).
For installation, perform in the reverse order of the removal procedures. n After inserting the board, press in the two eject levers simultaneously and connect firmly the board to the connector of the motherboard (MB-887 board).
1-22
GY-8240UWD GY-8240FC
|
|
|
> |
|
