|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
EN
23
MSET Menu Menus
AE (Manual Exposure) Adjusts the brightness. Settings ([ ] = Factory-preset) For video recording [AUTO]: The brightness is adjusted automatically. �6 to +6: Corrects the brightness within this range in increments of 1. Use / to set the value.
To lock the exposure When the menu disappears after you finish configuring the setting, press and hold 49 for more than 2 seconds. The indicator appears. AF (Manual Focus) Adjusts the focus. [AUTO]: The focus is adjusted automatically. : Adjusts the focus manually. Use / to set the focus. (When zooming, the subject will not go out of focus if you adjust the focus at the telephoto (T) side before zooming to the wide-angle (W) side.) [AUTO]: White balance is adjusted automatically. MWB: Adjusts the white balance manually depending on the light source. 1) Hold a sheet of plain white paper White paper in front of the subject. Adjust the zoom, or position yourself so that the white paper fills the screen. 2) Press and hold 49 until the indicator starts blinking then stops blinking. FINE: When shooting outdoors on a sunny day. CLOUD: When shooting outdoors on a cloudy day. HALOGEN: When a video light or similar type of lighting is used.
WB (White Balance) Adjusts the white balance to achieve the optimum colors for the amount of light in your surroundings during recording.
CONTINUED ON NEXT PAGE
RECORDING
For still image recording [±0]: The brightness is not adjusted. �2.0 to +2.0 (EV): Corrects the brightness within this range in increments of 1/3EV. Use / to set the value.
|
|
|
> |
|
