DURABRAND H9710ED
Quick Start

Channel Presetting

7) Press Press

or or

to select �CHANNEL�, then press . . The DVD/VCR tuner will begin to search up or down automatically.

Channel Presetting

Tuning of broadcast channels not already preset in the DVD/VCR can be performed in two ways.

When a channel is found, the DVD/VCR will stop searching and the picture will appear on the TV Screen. You can select desired channel number by using the number buttons. You must refer to the following Channel Plan table and press three digits to select the channel number. (To select channel 24, press �0� button first and then press �2� and �4�. ) 8) Press to exit.

Automatic Channel Preset
1) Turn on the TV and select the channel set as the video channel on the TV. 2) Press , then . 3) Press or to select �INITIAL�, then press . 4) Press or . . to select �CH TUNING�, to select �AUTO�, then press 5) Press or then press

MENU TIMER SET UP INITIAL

Channel Plan
CH Indication
INITIAL CH TUNING CLOCK RF OUT

TV Channel IRA � IRJ, GAP E21 � E69 X, Y, Z, Z+1, Z+2 S1 � S20, GAP S21 � S41

01 � 10 21 � 69 74 � 78 80 � 99, 100

CH TUNING AUTO MANUAL MOVE

121 � 141

Select a Channel
Scanning

You can select a channel using CH. ( / ) or directly pressing the number buttons on the remote control.

Manual Channel Preset

Manual channel preset enables you to manually tune in a channel. 1) Press , then . 2) Press or to select �INITIAL� , then press . 3) Press or to select �CH TUNING�, then press . 4) Press or to select �MANUAL� , then press . 5) Press or to select �POSITION�, then press . you can change the background to solid blue or the static screen by pressing . 6) Press the number buttons, , or to select a position number from 01-99, then press . When a weak signal is received in Manual Tuning mode,

Loading and Playing a DVD
1) Turn on the TV, amplifier and any other components connected to the DVD/VCR. 2) Set the TV and audio receiver (commercially available) to the correct channel. 3) Press STANDBY-ON and confirm that the DVD OUTPUT indicator is lit. If not, press to switch to DVD mode. 4) Press to open the disc loading tray and place the disc on the tray, with the label side up. 5) Press . The tray will close automatically and playback will start. � For DVDs with a title menu recorded, the screen will display the title. 6) Press to stop playback. Note: � A �prohibited icon� may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by this unit or the disc.