|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
;
The manual was very helpfull, it answerdes all my questions, and i was surprized to find the original manual on this site! Big thumbs uP:)
HOW TO USE
1. Connect the transmitter and AV equipment. (Refer to page 7) 2. Connect the AC adaptor to the transmitter, then plug the AC adaptor into an AC outlet. (Refer to page 8) 3. Turn on the power on the transmitter and the connected AV equipment.
HOW TO USE
5. Adjust the volume control of the connected AV equipment and the headphones, and set them to the desired listening level. 6. Turn the TUNING control to get the best reception in the headphones. In cases of interference or too much noise, select the CHANNEL switch on the transmitter to another position, then repeat step 6.
To set optimum signal reception, adjustments should be done within a range of approx. 7 m between the transmitter and the headphones.
Transmitter power When an audio signal is input, the transmitter�s power is turned on automatically, and the indicator lights in green. Also, when no audio signal is input for about a minute, the indicator goes out automatically and the power turns off. (Automatic Power On/Off function) The Automatic Power On/Off function is activated from audio on the left channel. The function may not activate properly in situations when the audio signal is detected only from the right channel. In some situations, the power may not be turned on automatically by the input sound (e.g. a song with a quiet opening or gradual fade-in). This is not a
Within approx. 7 m
VOL.
MAX. MIN.
4. Turn on the headphones� power. To avoid excessive volume, first set the headphones� volume to a low level.
Tips for better use For improved sound quality, set the volume level of the connected equipment as high as possible without causing distortion, while setting the volume level of the headphones to a slightly lower level.
After use
Keep the headphones� power off. Notes: 1. When using the headphones, don�t raise the volume excessively. Continuous listening for a long time at high volumes may damage your hearing. 2. For safety reasons, do not use the headphones while riding a bicycle or driving a motorcycle, car, etc.
Before using the headphones for the first time, charge the rechargeable Ni-Cd battery.
12
13
|
|
|
> |
|
