|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
1996-09-01
HR 8 ....
DAP129
General: This Service Information belongs to Service Manual 4822 729 21641. Panels: Vacuum cleaners produced up to production date 9636. In case version panel item 13 or button panel item 39 must be exchanged, they must always both be replaced as a result of a modified, non- interchangeable snap construction. Cord winder lever (item 12) 4822 402 10108 improved. The complaint �cord winder does not work� is probably due to the lever. If the cord winder fails to wind the cord, the lever (item12) will have to be replaced by a lever made of a different improved material. Onwards 9638 the modification is in production and available as spare (4822 402 10108). Low voltage version. Specific parts for these vacuum cleaners are: Item Order no. 15 15 20 4822 214 11913 4822 214 11912 Description Pcb rem. control 100 - 127 V Pcb eco/auco 100 - 127 V In the dust chamber a hole with a diam. of 6 mm must be drilled, to cool the cord winder via the cord winder cooling hose, (position the hole as is in the dust chamber to be replaced). In the reel half spring unit a rib must be removed to connect the cooling hose, just as is in the replaced unit. 4822 530 21034 Cord winder cooling hose (The correct lenght of the tube without connectors is 84 mm). Valve assy Pcb on motor 100 - 110 V Motor 100 - 110 V with warning sign. (Motor metal parts are under live if switched on). HR8733 x HR8765 x x HR8847 x x
21
x
x
x
�
x
x
x
43 44 55
4822 360 10233 4822 214 11911 4822 361 10913
x x x
x x x
x x x
58 59
4822 101 11689 4822 450 10209
Slide potentiometer Suction power indicator
x x
x -
-
PCS 87 607
4822 729 21703
|
|
|
> |
|
