|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
 ;
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
;
Excellent copy that was delivered within 12 hours and solved my problem.
Windows 98/98SE/2000/Me
SOFTWARE INSTALLATION
Before you can use this unit with your PC, you must first install the driver software. Perform the following installation before connecting this unit to the PC. 1. Close all open applications. 2. Insert the provided USB driver CDROM into your PC�s CD-ROM drive. 3. The installation software will start up automatically in a few seconds. If it does not start up, try one of the following. Method 1 � Click the [START] button and select [RUN] from the displayed menu. � Enter (CD-ROM drive name): \SETUP.EXE in the displayed dialog box. (e.g.: D: \SETUP.EXE) � Click the [OK] button. Method 2 � Double-click [My Computer]. � Double-click the CD-ROM icon. � The installation software starts up. If it does not start up and the CDROM window opens, double-click [SETUP.EXE]. 4. When the installation software starts up, the operation in Fig. 1 is performed and then the window in Fig. 2 is displayed. In Fig. 2, click [Next]. To stop installation, click [Cancel]. 5. In Fig. 2, click [Next] to start installation of the driver software (Fig. 3). 6. When the installation is complete, the window in Fig. 4 is shown. To activate the installed driver software, restart the PC. Select [Yes] and click [Finish] to restart the PC automatically. To restart after closing the installation software, select [No] and click [Finish]. In this case, do not connect this unit to the PC until restarting the PC. Fig. 3
Fig. 1
Fig. 2
Fig. 4
10
|
|
|
> |
|
