|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
 ;
Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
6
(continued) batteries into the remote The minute indication flashes. Step 1: Hooking up the system Inserting two size AA (R6) 3 Press ENTER.
Step 2: Setting the
To attach the front speaker pads
You must set time before using the timer speakers and prevent them from slipping. functions.
e The clock is on a 24-hour system for the E European model and a 12-hour system for e other models. E
time
Attach supplied front speaker pads to the bottom of speakers to stabilize the
This section is extracted from instruction manual.
The 24-hour system model is used for
4
Press . or > repeatedly to set illustration purposes. Press ENTER.
The clock starts working.
Tip the minute.
5
With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
1 2,4 3,5
If you�ve made a mistake, start over from step 1.
Note
. >
Positioning the speakers time, remove the batteries to avoid possible damage Tip
If you do not use the remote for a long period of Y X x
m M x
Before you connect them, determine the best from battery leakage. location for your speakers.
N X
When carrying this system
Do following to protect CD To change the time 1 Make sure that all discs are removed from
1 Press CLOCK/TIMER SET.
Place the front speakers at an angle mechanism.
1
of 45 degrees from your listening while power is off. To change the time position. while power is on, do the following: the unit.
The previous explanation shows you how to set the
Front 2 Hold down CD and then press ?/1 so that speaker �LOCK� appears in the display.
2 Press . or > repeatedly to select 3 Press ENTER. 3 Unplug the AC power cord. 4 Perform steps 2 through 5 above.
SET CLOCK.
(L) (R)
45º
Note
1
The hour indication flashes.
Surround The clock settings are canceled when you disconnect speaker the cord or if a power failure occurs. Press CLOCK/TIMER SET. (L) (R)
2 Place the surround speakers facing
each other at about 60 to 90 cm above your listening position.
Surround speaker
60 to 90 cm
2
Press . or > repeatedly to set the hour.
6 7
|
|
|
> |
|
