|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
 ;
Excellent manual, very clear, technical specification provided, useful information regarding adjustment and set up.
;
fast and easy and exactly what I was looking for. Not the cheapest but value for money after all.
;
The manual for the Sansui P-L75 was not one of the more informative turntable manuals around but for $5 it was helpful enough.
HCD-EP515 SECTION 4 MECHANICAL ADJUSTMENTS
Precaution 1. Clean the following parts with a denatured alcohol-moistened swab: record/playback heads pinch rollers erase head rubber belts capstan idlers 2. Demagnetize the record/playback head with a head demagnetizer. 3. Do not use a magnetized screwdriver for the adjustments. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the rated power supply voltage unless otherwise noted. Torque Measurement
Mode FWD FWD back tension REV REV back tension FF/REW Torque meter CQ-102C Meter reading 3.04 � 6.96 mN � m (31 to 71 g � cm) (0.43 � 0.98 oz � inch) 0.20 � 0.58 mN � m (2 to 6 g � cm) (0.02 � 0.08 oz � inch) 3.04 � 6.96 mN � m (31 to 71 g � cm) (0.43 � 0.98 oz � inch) 0.20 � 0.58 mN � m (2 to 6 g � cm) (0.02 � 0.08 oz � inch) 6.97 � 14.02 mN � m (71 to 143 g � cm) (0.98 � 1.99 oz � inch) 9.8 mN � m or more (100 g � cm or more) (1.4 oz � inch or more) 9.8 mN � m or more (100 g � cm or more) (1.4 oz � inch or more)
CQ-102C
CQ-102RC
CQ-102RC
CQ-201B
FWD tension
CQ-403A
REV tension
CQ-403R
12
|
|
|
> |
|
