This document is just what I was looking for, it´s very useful, it contains adjustment procedures for the final stage of the power amp and also
has a complete wiring diagram and description of the main semiconductors used in the design.
Text excerpt from page 42 (click to view)
HCD-HPX9
4-3. ASSEMBLING OF THE GEAR (STOCK ROT SHORT) (RIGHT)
7 two screws (2 � 6) 8 screw (1.7)
Note: Install the stock box (R) right after finishing the phase adjustment.
6 stock box (R)
short
4 gear (stock rot short) 2 gear (stock rot short)
UPPER SIDE
PRECAUTION DURING GEAR (STOCK ROT SHORT) INSTALLATION 1 Align the edges of the stockers. Keep the position of the stockers until finishing installation of the gear (stock rot short) and the stock box (R).
FRONT SIDE
gear (stock rot short)
3 Adjusting the one stockers