|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
HCD-VP800AV
[CD Ship Mode (No Memory Clear)] � This mode moves the position to the position durable to vibration Use this mode when returning the set to the customer after repair. Procedure: 1. Press `/1 button to turn the set ON. 2. Press three ENTER , DISK 1 button and CD button simultaneously. 3. After the �STANBY� display blinks six times, a message �LOCK� is displayed on the fluorescent indicator rube, and the CD ship mode is set. [CD Ship Mode (Memory Clear)] � This mode moves the pickup to the position durable to vibration. Use this mode when returning the set to the customer after repair. Procedure: 1. Press `/1 button to turn the set ON. 2. Press three buttons CD and `/1 button simultaneously. 3. After the �STANDBY� display blinks six times, a message �LOCK� is displayed on the fluorescent indicator tube, and the CD ship mode is set. [CD Service Mode] � This mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the pickup. Procedure: 1. Press `/1 button to turn the set ON. 2. Select the function �CD�. 3. Press three buttons ENTER , DISC 1 , and x simultaneously. 4. The CD service mode is selected. 5. With the CD in stop status, press M button to move the pickup to outside track, or press m button to inside track. 6. To exit from this mode, perform as follows: 1) Move the pickup to the most inside track. 2) Press `/1 button to turn the set OFF. Note: � Always move the pickup to most inside track when exiting from this mode. Otherwise, a disc will not be unloaded. � Do not run the sled motor excessively, otherwise the gear can be chipped.
14
|
|
|
> |
|
