|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
4-2-5. CUE Head Height Adjustment
Checks 1. Alignment tape play back Play back the alignment tape HR2-1A (from 00:00 to 15:00). 2. CUE head height check (1) Check to see that when portion A of the tape shown in the figure is pressed down, the level decreases. If the level increases, carry out step 3. (2) Check to see that when portion B is pushed up, the level decreases. If the level increases, carry out the step 3. (3) Change the mode from EJECT to PLAY 2 or 3 times. Check to see that the output level is the same as the pre-PLAY level and does not change. If the level changes, carry out the step 3. (4) Change the mode from REV search to PLAY 2 or 3 times. Check to see that the output level is the same as the pre-PLAY level and does not change. If the level changes, carry out the step 3. REV search mode . Press the REW button after pressing the PLAY button. (The PLAY and REW buttons on the keyboard light up.)
Height adjusting nut
CUE head assembly CUE/TC head
A
B
CUE/TC head A
B
Spec. : The level decreases when the alighment tape is pressed down and pushed up.
4-32
HDW-700AE MMP2V1
|
|
|
> |
|
