|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
OK?..manual is complet and helpfull... for repairing such a old and rare boombox like JVC PCM it is necessary...
;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
5-7. Registering the OHB File
5-7-2. Adjusting the ND Offset
The white balance may be slightly deviated in the ND filters. In such cases, adjust the offset. Taking the ND filter 1 white balance as the reference, the ND offset stores the deviation of the white balance of ND filter 2, 3, 4. Adjusting the ND Offset (1) Set the setup menu as follows. [FILE] � [REFERENCE] � [STANDARD] (2) Connect the waveform monitor to MONITOR OUT connector of this unit. (3) Select ND filter 4, and shoot the grayscale chart. Check that the illuminant condition is under that video level is within 560 mV thru. 630 mV. Then note the video level at this time. n Do not adjust the ND offset if the video level is less than 560 mV. (4) Select 1 by the ND filter knob, and set the iris so that the video level is the same level as the noted video level of Step (2). (5) Execute the auto white balance. (6) Select 2 by the ND filter knob, and set the iris to meet the noted video level of Step (2). (7) Execute the auto white balance. (8) Select 3 by the ND filter knob, and set the iris to meet the noted video level of Step (2). (9) Execute the auto white balance. (10) Select 4 by the ND filter knob, and set the iris to meet the noted video level of Step (2). (11) Execute the auto white balance. (12) Store the ND offset. Execute the setup menu as follows. [FILE] � [OHB] � [STORE|FILE] m . Adjust precisely to meet the noted video level, otherwise the deviation of the white balance of the ND filter may generate in some cases. . If the level cannot be adjusted properly using the iris, adjust the level using the shutter/ECS or gain-up. Calling the ND Offset When the ND filter is changed, the ND offset will be called automatically. Initializing the ND Offset Execute the setup menu as follows. [FILE] � [FILE|CLEAR] � [OHB|ND|OFFSET]
HDW-F900 P1
5-11
|
|
|
> |
|
