|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hi - happy with what I received but not quite what I wanted - my fault I assumed that service manual would also include operational instructions which is what I needed - all I needed to know was how to turn the radio - thanks
;
this Manual very important when i buy this Manual i already fix the trouble of my Camera..... thanks keep up the good work.!
 ;
This service manual helped me to repair my PIONEER. Iam very satisfied, that I found it here.
Even the price of manual was not so high that person would not be able to spend a few money.
But that is very worth spent money. Thanks
;
Excellent quality service manual. Quick processing, fair prices. Love to do business again. Thank you!!!
;
Excellent service manual, the only known point of note is the alignment of improvability scanned pages within the pdf page. The resolution is good.
2-4. Cleaning Optical Connector
2. When the turn stops, pull out the remover in the straight line forcedly. n The alignment sleeve can be removed/reinstalled with the sleeve itself attached to the tip of the remover. Great care should be taken so as not to lose or damage the alignment sleeve. (Alignment sleeve: Sony P/N 9-980-074-01)
Alignment sleeve
3. Clean the tip of the white optical contacts by a cotton swab moistened with alcohol.
Optical contacts (white)
4. Insert the remover with the alignment sleeve attached to its tip, and push it until it clicks. 5. Rotate the remover counterclockwise to install the alignment sleeve, and extract the remover. Optical connector cable After replacing the optical connector of the camera or HDCU, or replacing the SDI-11/RX-28 board, clean the tip of the white optical contact of the optical connector cable by a cotton swab moistened with alcohol.
Optical contact (white)
2-10 (E)
HDCU-700A
|
|
|
> |
|
