|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
1-4. Name and Functions of Switches and LEDs
S1-3 : Field frequency selection switch When switch S1-4 is selected to MANUAL, this switch is selected the field frequency. Upper : 60.00 Hz Lower : 59.94 Hz Factory setting: 59.94 Hz n When switch S1-4 is selected to AUTO, this switch is not operated even if its setting is changed. S1-4 : Field frequency mode selection switch This switch is selected the field frequency. Upper : MANUAL Lower : AUTO Factory setting : AUTO S1-5 and S1-6 : Option switches These switches are not usually used. Factory settings : All lower (OFF) positions S1-7 : AUDIO CHANNEL SELECT switch This switch is selected the channels 1 to 4 or the channels 5 to 8 of the providing audio signal. Upper : Channels 5 to 8 Lower : Channels 1 to 4 Factory setting : Channels 1 to 4 S1-8 : AUDIO DELAY selection switch The offset of the 1 frame (33.3 msec) is added to the delay amount. Upper : ON Lower : OFF Factory setting : Lower (OFF) S2 : AUDIO DELAY selection switch The delay amount (0 to 9) is changed the unit of 16 samples (333.3 usec). When this switch is selected A to F, the delay amount is fixed 157 samples (3.27 msec). When this switch is selected to 9 and S3 switch is selected D to F, the delay amount is fixed 157 samples (3.27 msec). Factory setting : 0
S3 : AUDIO DELAY selection switch The delay amount (O to F) is changed the unit of 1 sample (20.8 usec). Factory setting : O n A combination of S1-8, S2 and S3 switches, the delay amount of the digital audio signal on the video signal is selected 158 samples + 1 frame maximum. S4 : CPU reset switch This switch is initialized CPU. It is not usually used.
HKPF-105
1-5 (E)
|
|
|
> |
|
