|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
 ;
Great to be able to set channels again, on an old but stoll fine working TV
;
Good quality instructions manual. Very useful to me. Quick and excellent service from Owner-Manuals... Thanks !!!
;
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
50
3 Select the broadcast station (only when
TUNER is selected above). (1) Select the preset station No.
Timer operation
3 Select the broadcast station (only when
TUNER is selected above). (1) Select the preset station No.
set / demo
÷ When the timer setting is completed by pressing the set/demo key, "COMPLETE !" is displayed. ÷ When "PLAY" is selected, the timer playback will start at the volume setting used at the moment the unit is set to the Standby mode.
5 Reserve the timer operation.
TIMER
Application section
6 Put the unit in standby mode.
POWER
\ \
(2) Set it.
set / demo
(2) Set it.
÷ When the timer setting is completed by pressing the set/demo key, "COMPLETE !" is displayed. ÷ The sound is muted during timer recording. If you want to monitor the recorded sound, turn the volume/multi control knob (or press the VOLUME key on the remote) to adjust the volume.
To check or modify the reservation contents, restart the timer reservation from the beginning.
Each press switches the timer as follows. 1 "O.T.T." 2 "PROG. 1 " 3 "PROG. 1 2 " 4 "PROG. 1 2 " 5 Extinguished
÷ Press the TIMER key on the remote repeatedly until "PROG. 1", "PROG. 1 2" or "PROG. 1 2" lights. ÷ To cancel timer reservation after it has been activated, press the TIMER key while the unit is on so that all of the timer-related indicators are turned off. (The setting made above is still left in memory.) ÷ When the unit enters the Standby mode, the standby/ timer indicator lights in green. ÷ If there is a power failure or the power cord is unplugged after the timer reservation has been activated, the standby/timer indicator blinks in green. In this case, the clock setting should be restarted from the beginning.
\ \
|
|
|
> |
|
