|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
DISASSEMBLY ADVICE CONNECTING PIECE 11 remove Wall holder I remove Screw A 2x remove Cover 101 SWITCH 5 remove Wall holder 1 remove Screw A 2x remove Cover 101 remove Screw B and C remove Cover 4 unsolder Wires switch
PARTS LIST HP 930 POS 1 2 3 4 6 7 8 DESCRIPTION WALLHOLDER WATER CONTAINER CONTAINER BRUSH/SPOUTS COVER PRINTED MOUNTING PLATE PUMP UNIT TRAFO 220 - 240 V TRAFO 110 - 127 V TRAFO 220 V, KOREA TRAFO 200 V, HONG KONG 9 HOLDER WATER JET HOUSING PRINTED CONNECTING PIECE STUD P.C.B. COIL CLAMPING RING HAND UNIT WATER JET SET OF JET SPOUTS HAND UNIT HP 735 NiMh HAND UNIT HP 735 NiCd 19 BRUSH HP 790/2 10 11 12 13 14 15 16 17 18 SERVICE CODE 4822 256 10189 4822 441 81124 4822 418 10297 4822 442 01119 4822 464 30208 4822 360 10147 4822 148 60303 4822 148 60304 4822 146 10892 4822 146 10893 4822 256 10188 4822 441 12064 4822 526 41098 4822 462 40374 4822 214 70581 4822 157 11413 4822 532 61262 4822 690 10144 4822 360 10356 4822 690 10142 4822 690 10143 4822 479 20218
WATER JET 14 remove remove remove remove remove Wall holder 1 Screw A 2x Cover 101 Screw B and C Connect.piece 11
lift Trafo/Mount.plate remove Ring 13/Tube MOTOR 7 remove Wall holder I remove Screw A 2x remove Cover 101 remove Screw B and C remove Cover 4 remove Connect.piece 11 unsolder Wires motor lift Trafo/Mount.plate remove Ring 13 / Tube TRAFO 8 remove Wall holder I remove Screw A 2x remove Cover 101 remove Screw Band C remove Cover 4 remove Connect.piece 11 unsolder Wires Motor unsolder Wires switch lift Trafo/Mount.plate P.C.B. 13 remove Wall holder 1 remove Screw A 2x remove Cover 102 remove Screw B and C remove Cover 4 unsolder Wires COIL 14 remove Wall holder 1 remove Screw C 2 x unsolder Coil
IMPORTANT
* AFTER THE PRODUCT HAS BEEN REPAIRED, IT SHOULD FUNCTION PROPERLY AND
HAS TO MEET THE SAFETY REQUIREMENTS AND LEGAL REGULATIONS AS LAID DOWN AND ESTABLISHED AT THIS MOMENT.
* PARTS, WITH NUMBERS FROM 100 UPWARDS, CANNOT BE ORDERED SEPARATELY.
The Toothbrush charging is OFF when the Waterjet motor is ON
|
|
|
> |
|
