|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual was destroyed and this purchase made it possible to recover my manual . It was easy to down load and smooth to use thanks .
 ;
Turns out this was not the manual i was looking for. The concertmate 670 keyboard i have is a "Realistic" model made for Radio Shack and none of the diagrams on the owners manual i received matches up. HOWEVER, I must say the service Owners Manual provides was fast and efficient by being available online. The manual was in good readable condition and easily downloaded.
;
Great price, Quick delivery, the document was very usefull A+++++++++++++++
;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
Application Example #3
This example shows a two-channel (stereo) setup utilizing two subwoofers and two top-boxes. Audio signals for the Left and Right channels are supplied by the mixer console. This signal source can be just about any variable-output level audio source, such as DJ mixers, professional CD players, or computer-based audio signal sources. Audio output from the mixer is connected to the subwoofer input of each channel. Each subwoofer�s FULL RANGE LINE OUT connector is used to connect to its respective top-box. Turn ON the top-box�s 100 Hz LOW-CUT FILTER. Alternately, the top-boxes could be connected to the subwoofer�s 100 Hz LOW-CUT OUT and the top-box 100 Hz LOWCUT FILTER turned off. The only possible issue with this method of connection is unexpected noises (turn-off thumps) if the subwoofer is powered down before the top-boxes. If connected as shown, power sequencing is not an issue.
Application Example #3 physical diagram.
Channel 1 or Left Channel
Channel 2 or Right Channel
HPR152F or HPR153F Application Example #3 hookup diagram. Use only high-quality balanced cables for interconnecting the audio equipment. Ensure the top-boxes have their 100 Hz LOW-CUT FILTER switched ON when connecting to the subwoofer�s FULL RANGE LINE OUT as a signal source. Also, be sure to use either the Left or Right (marked L or R) on the subwoofers. If the subwoofer�s input is connected to the Right (R) channel connector and the output to the top-boxes is connected to the Left (L) channel connector, no signal will reach the top-box (no sound from the top-box).
HPR152F or HPR153F
HPR151W or HPR181W
HPR151W or HPR181W
Mixer or Other Audio Source
13
 $4.99 HPR151W QSC
Quick Start Quick start guide ( sometimes called quick guide ) contains most important information on how to use…
|
|
|
> |
|
