PHILIPS HR1551
Service Manual

Mixer HR 1550 HR 1551

Philips Domestic Appliances and Personal Care

MSH coding 8831 550 00000 8831 551 00000 PRODUCT INFORMATION HR1550 / HR 1551 Weight appliance Colour appliance Dimensions Motor : : : : 3 speed mixer + puls 1500 gr ivory 195 x 90 x 145 mm SERVICE INFORMATION Mounting gearwheels When mounting the gearwheels make sure that the cams of the gearwheels are situated at the front of the beaters. The angle between the beaters must 45°. 90� So when carrying out a 45� repair be sure that the gearwheels are mounted correctly (see Fig. 1). 21½ : 1 190 Watt 230 V, 50-60 Hz 1,25 m Switch position 1 800 rpm Switch position 2 900 rpm Switch position 3 1050 rpm Pulse position 1050 rpm
F

: Serles wound Statically and dynamically balanced Self lubricated

Transmission ratio between rotor spindle and gearwheel : Power : Cordlength : Speeds beaters :

Fig. 1

Lubrication Use graphite grease code no. 4822 390 20004 to grease the appliance on the following points: 1. Spaces between the teeth of the wormwheels. 2. Both sides of the wormwheel shaft. Motor The motor cannot operate properly when, due to contamination, carbon brush is unable to move freely in guide bush and consequently cannot be pressed against the commutator.

A

B

D

E

PULSE 0 1 2 3 C1 R

Published by Philips Domestic Appliances and Personal Care

Printed in the Netherlands

© Copyright reserved

Subject to modification

4822 729 22149 99/03
PCS 101 217