|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
CIeaning � Switch off and remove the mains plug from the wall socket before cleaning. Wait for the circular blade to come to a complete standstill. � Never immerse the basic appliance (i.e. the part containing the motor) into water or any other fluid. Do not rinse either. � Clean the appliance with a damp cloth immediately after use, including the circular blade. Do not use any scouring cleaning materials. Do not clean in a dishwasher. Attention: the blade is very sharp. Circular blade To disassemble the circular blade: - Remove the blade cover (fig. 13). - Rotate the blade lock a quarter turn clockwise (fig. 14). When the lock is in a vertical position the circular blade can be removed (fig. 15). To reassemble the circular blade: - Rotate the blade lock a quarter turn anticlockwise. When the lock is in a horizontal position the circular blade is fixed. Ensure that the blade is safely assembled before switching on. - Replace the blade cover (fig. 16-17). Stop plate To disassemble the stop plate: - Turn the control knob anti-clockwise until it stops (fig. 18). - Then take off the stop plate (fig. 19). To reassemble the stop plate: - Insert the stop plate, press on lightly and turn the control knob clockwise (fig. 20). Carriage lock (slide) Before storing the appliance you can fixate the carriage in the foremost position (fig. 21).
For U.K. only: Fitting a different plug This appliance is fitted with a BS 1363 13 Amp. plug. Should you need to replace the plug, connect the wires as follows: Green/yellow wire to the Earth terminal (E) of the new plug. Brown wire to the Live (L) terminal of the new plug. Blue wire to the Neutral (N) terminal of the new plug. Always fit the same value of fuse as that originally supplied with your appliance. Only use BS 1362 approved fuses. As a guide only: Appliances under 700 W can have a 3 Amp. fuse (red) and all others should have a 13 Amp. fuse (brown). When disposing of an old plug (particularly the moulded type which has been cut from the mains cord) always remove the fuse as the plug could be dangerous if ever inserted in a live socket.
5
|
|
|
> |
|
