|
|
|
Who's Online
There currently are 5995 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
HR-IP820U INDEX Plus+
97.5.20 5:45 PM
Page 14
Recording
Setting The Cable Box Channel Number
After the record mode is initiated, the cable box channel number must be set if a cable box is in use. The screen will ask for the cable box channel number. b Insert a tape. If the screen to the right appears (as when using a tape that already has a Tape Number and has been entered), skip to step 4. c Insert a tape. If the screen to the right appears (as when using a tape that has a directory which is not recognized by your VCR), skip to step 5. 2 Start recording.The screen to the right appears:
DIRECTORY DOES NOT EXIST IN THIS VCR
TAPE#0123 MUSIC TV
Procedure
1 Enter the cable box channel number using the DIGIT keys. 2 Press ENTER.
Setting The Tape Number
After recording has been initiated, the VCR must know the Tape Number before the data can be stored in memory. If you know the number but the VCR can't read it, you need to enter it. When using a brand new tape, you have to command the VCR to assign a Tape Number for you. The procedure differs slightly depending on the situation.
RECORDING...
Preparation
1. Turn on the power to the TV and the VCR. 2. Set the TV to the channel or mode appropriate for video playback.
TAPE# CAN NOT BE READ 1 INPUT TAPE# 2 CREATE NEW TAPE# PRESS(1)or(2)
Press 2, or don't press either 1 or 2. The new Tape Number is automatically assigned. Go to step 6. 3 Start recording. The screen to the right appears:
Procedure
1 a Insert a tape. If the screen to the right appears (when using a new tape or one recorded on a nonINDEX Plus+ VCR), continue from step 2.
TAPE# CAN NOT BE READ
RECORDING...
TAPE# CAN NOT BE READ 1 INPUT TAPE# 2 CREATE NEW TAPE# PRESS(1)or(2)
Press 1. The screen to the right appears:
ATTENTION:
� When using an RI tape, if the screen in step 1 a appears, skip to step 3. � If you use a tape that already has a Tape Number and has been recorded on, but has not been entered in the library, the screen in step 1 a appears. Skip to step 3. � In the event that you press STOP at the "READING TAPE# . . ." screen, stopping Tape Number reading partway through . . . . . . if the inserted tape has not yet been assigned a Tape Number, go to step 2. . . . if the inserted tape has already been assigned a Tape Number, go to step 3.
TAPE# [ ]
PRESS(DIGITS) THEN PRESS(ENTER) PRESS(CLEAR)TO MAKE CORRECTION PRESS(CANCEL)TO RETURN
Use the DIGIT buttons to enter the Tape Number. (To make corrections to the number you've entered, press CLEAR and input the correct number. To quit the process, press CANCEL and the previous screen reappears.) Once the correct number has been input, press ENTER.
Continued on next page.
14
|
|
|
> |
|
