|
There are currently no product reviews.
 ;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
2. Servo Circuit
A. Unstable Video in PB Mode.
Does the on screen noise level change periodically?
YES
Do CTL pulses appear at IC501 pin 97?
YES NO
Does the CFG divideIC501 waveform appear at pin 87?
YES
Is the height of the CTL Head adjusted correctly?
NO
Do the CTL pulses move when TRK is operated?
YES NO
Adjust the CTL Head.
Does the Video Envelope waveform appear at IC501 Pin 9?
YES NO
Replace IC501.
Replace IC501.
Check Y/C Block.
3-7
|
