|
Who's Online
There currently are 6009 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
;
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
;
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
;
Hr, klasse , good manual, verry fast on my e-mail, very usefull manual. rgds; ahm zeegers
Checking, canceling or changing programme settings
A Disengage timer recording standby mode
Press #, then press 1. � When �AUTO TIMER� is set to �ON� ( 12), press only 1.
Automatic Satellite Programme Recording
You can automatically record a satellite programme which is timer-programmed on your satellite receiver. on the rear panel. B Set timer programme on satellite receiver referring to its instruction manual.
A Connect a satellite receiver to the L-2 IN/DECODER connector
B Access Program Check screen
Press ".
C Load a cassette with the record safety tab intact. D Set �L-2 SELECT� to �A/V� or �SAT�. ( 13) E To set the tape speed, press SP/LP (p). The current setting for F
the tape speed appears on the display panel or the screen for about 5 seconds. Press SP/LP (p) again to change the setting while tape speed is displayed.
C Access Program screen
Press " again. Each time you press ", the next programme�s screen appears.
D Cancel or change programme setting
To cancel a programme, press &. To change a programme, press the appropriate button: START+/�, STOP+/�, DATE+/�, DAILY (number key �8�), WEEKLY (number key �9�), PR+/�, VPS/PDC (number key �7�) and/or SP/LP (p). � To change �TV PROG� to �SAT� for the channel position, press the number key �0�.
Press SAT# for more than 2 seconds. The recorder turns off automatically and enter the Automatic Satellite Programme Recording mode (the SAT# indicator lights up). When signals come into the recorder from the satellite receiver, the recorder starts recording (the SAT# indicator blinks). The recorder stops recording and turns off when signals stop coming in.
NOTES:
� Be sure not to turn on the satellite receiver before the programme starts broadcasting; otherwise, the recorder starts recording when the satellite receiver is turned on. � To disengage the Automatic Satellite Programme Recording mode, press SAT# (the SAT# indicator goes off). � Depending on the type of satellite receiver, Automatic Satellite Programme Recording may not be compatible. � B.E.S.T. does not work in the Automatic Satellite Programme Recording mode. � Power Save mode does not work in the Automatic Satellite Programme Recording mode. � Just Clock does not work in the Automatic Satellite Programme Recording mode.
E Return to normal screen
Press " repeatedly until no Program screen is shown.
F Re-engage timer recording standby mode
Press #. The recorder turns off automatically and �#� is displayed on the display panel. � When �AUTO TIMER� is set to �ON� ( 12), the timer recording standby mode automatically resumes when you turn off the recorder.
� 10 �
$4.99 HRJ690EU JVC Service Manual Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
|
|
|
> |
|