JVC HRJ781EU
Owner's Manual

14 EN

SAT CONTROL SET (cont.)

C Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to �INITIAL SET�, then press OK or e.

D Access the Sat Control Set screen.
Press rt to move the highlight bar (pointer) to �SAT CONTROL SET�, then press OK or e.

E Enter the satellite receiver�s brand.
Press the appropriate NUMBER keys to enter the brand code from the list on page 15, then press OK.
� If the brand code you entered is invalid, the code field will be reset. Enter the correct brand code again. � If the recorder is in playback or recording, you cannot set the brand code.

F Select the satellite receiver�s channel.
Press the appropriate NUMBER keys to enter the channel position on the satellite receiver, then press OK.
� You can select the channel position between 1 to 999. � After pressing OK, the recorder enters the Test mode.

Setting satellite receiver's brand and channel
After installation, set the satellite receiver�s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly. Turn on the TV and select the video channel (or AV mode).

A Turn on the satellite receiver.
Turn on the satellite receiver�s power.

B Access the Main Menu screen on the
recorder.
Press MENU.