|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Easy to access. Clear instructions. No problems. Printed fine.
 ;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Editing
Editing with another VCR
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components� instruction manuals for connection and its operations.
Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR
This VCR (for recording) To AUDIO input To S-VIDEO input
A Make connections
Example 1: When another VCR is VHS VCR
Audio cable (not supplied) This VCR To AUDIO/VIDEO IN To AUDIO/VIDEO OUT S-video cable (not supplied)
To audio output
To S-video output
When using this VCR as the recording VCR, connect this VCR�s AUDIO/VIDEO IN connectors to the audio/video output connectors on another VCR.
When using this VCR as the playback VCR, connect this VCR�s AUDIO/VIDEO OUT connectors to the audio/video input connectors on another VCR.
Another VCR (for playback)
B Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
C Select input mode on recording VCR
To audio/video output Another VCR To audio/video input
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select �F-1� � when connecting the other VCR to the audio/video input connectors on the front panel. Press AUX or CHr/t on the Remote. Or on the VCR, press PAUSE[CH], and then FF[CH+] or REW[CH�]. See step 2 in �Basic Recording� ( pg. 10). When using this VCR as the recording VCR, select the appropriate mode ( pg. 14). When using S-VIDEO input connector on the front panel, set �FRONT AUX INPUT� to �S-VIDEO�. When using VIDEO input connector on the front panel, set �FRONT AUX INPUT� to �VIDEO�.
� If another VCR is monaural, connect this VCR�s AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR. Example 2: When another VCR is S-VHS VCR and equipped with S-VIDEO input connector.
This VCR (for playback) To AUDIO OUT To S-VIDEO OUT
D Select video input connector on recording VCR
E Select edit mode
Set the edit mode to �ON� for the VCRs if such a mode is equipped. � On this VCR, set �PICTURE CONTROL� to �EDIT� ( pg. 13).
F Start playback
Press PLAY (4) on the playback VCR.
Audio cable (not supplied) S-video cable (not supplied)
G Start recording
Press REC (7) on the recording VCR.
Various connection for editing tapes
The following three methods can be used for editing tapes. � VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing. � S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing. � S-VHS to S-VHS (S-VIDEO connection): Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.
To video input
To S-video input
Another VCR (for recording)
� 15 �
|
|
|
> |
|
