|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
basic features
27
Return to Normal Screen
Press p or O. PROGRAM COMPLETED appears on the TV screen for about 5 seconds, then the normal TV screen appears. If the timer programme is overlapped with another one that was already set, PROGRAM OVERLAPPED appears on the TV screen and Err appears on the display panel. ( pg. 30)
Engage Timer Mode
You must now put the VCR into Timer Mode by pressing c otherwise no recording will take place. Make sure that the VCR turns off automatically and c appears on the display panel. To disengage the Timer Mode, press c again. If no video tape is loaded or the safety tab is removed, c and t will flash. Insert a tape to record! If you have set the VCR to Timer Record a programme and have not engaged the Timer Mode, you will see this warning appear on your screen five minutes before the appointed start time. To clear the display, press x.
warning If the VCR is being used as the player for tape-to-tape dubbing, this warning screen will be recorded by the other VCR.
� WARNING � TIMER RECORDING TO START SOON f [x]
|
