|
There are currently no product reviews.
 ;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
;
Very pleased with the quality of the scan. No complaints whatsoever.
MECHANISM TROUBLESHOOTING GUIDE
E.
In PB mode Tape Presence not sensed.
Is the Pinch Roller attached to the Capstan Motor Shaft?
NO
Check Alignment positions (page 4-13).
YES NO
Does the T/Up Reel turn? Is the Belt ok?
NO
Replace the Belt.
YES
Does the Capstan Motor turn?
YES
Check the Clutch and Idler Assembly.
YES
Does the Drum Motor turn?
NO
Is the voltage supplied to the Capstan Motor Vcc1,Vcc2 each?
YES
Are there DPG, DFG pulses?
YES
Is the terminal voltage(vctl) of Capstan Motor supplied more than 4V?
NO
Check the Servo, Power.
YES
Are the T/Up and Supply Reel Sensors ok?
YES
Replace the Capstan Motor.
YES NO
Check the Servo, Syscon. Is the Vcc voltage of the Drum Motor normal?
NO
Check the Syscon, Circuit.
YES
Is the terminal voltage(vctl) of the Drum Motor more than 4V?
NO
Check the Syscon, Circuit.
YES
Replace the Drum Motor.
4-25
|
