JVC HR-XV2EK
Owner's Manual

Before Operation (Continued) - DVD part
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the player�s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select �DOLBY DIGITAL/PCM� if you connected this unit�s DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select �Stream/PCM� if you connected this unit�s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder. PCM: select when connected to a 2-channel digital stereo amplifier. This unit outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output Others Sample Freq. 48 KHz 96KHz
DOLBY DIGITAL

Others
The DRC, Vocal and PBC settings can be changed. Press 3/4 to select the desired item and press OK. 4 The setting of the selected item is changed between On and Off.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output
DRC On Vocal On PBC On

Others

Dynamic Range Control (DRC)
With the DVD format, you can hear a program�s soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.

/PCM

Stream/PCM PCM

Vocal
Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into a normal stereo sound.

Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.

PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs.

20